How Much Rainwater Can Different FloPlast Guttering Systems Handle?
Choosing the correct guttering system is important for effective rainwater drainage, particularly on properties with larger roof areas or exposed to heavy rainfall.
FloPlast guttering systems offer different flow rates depending on the gutter profile, downpipe size, outlet position and whether the gutter is installed level or with a fall.
The flow rate is measured in litres per second (L/s), while roof drainage capacity is expressed in square metres (m²).
FloPlast Gutter Flow Rate Chart
The FloPlast chart below compares the performance of Half Round, Square Line, Hi-Cap, Niagara Ogee and XtraFlo guttering systems.
It provides flow rates and roof drainage areas for two installation arrangements:
Outlet at the end of the gutter run: Rainwater flows towards an outlet positioned at one end.
Outlet at the centre of the gutter run: Rainwater flows towards an outlet positioned between two gutter runs.
The chart also compares guttering installed level against guttering installed with a 1:350 fall.

The chart includes maximum flow rates and BS 12056 design figures. The manufacturer's BS 12056 values apply a 90% safety factor to the maximum flow rate.
Which FloPlast Guttering Has the Highest Flow Rate?
According to the supplied chart, FloPlast XtraFlo offers the highest listed flow rate, making it suitable for applications requiring greater rainwater capacity.
For domestic properties, Half Round and Square Line guttering may provide sufficient capacity, while Hi-Cap and Niagara Ogee offer higher flow rates for larger roof areas.
The correct choice depends on the calculated roof drainage area, rainfall requirements and the complete gutter and downpipe arrangement.
Does Gutter Outlet Position Affect Flow Rate?
Yes. The chart shows that a centre outlet can provide greater overall drainage capacity than an end outlet because rainwater approaches the outlet from both directions.
Installing guttering with a suitable fall can also improve flow performance compared with a level installation.
Always follow the manufacturer's installation instructions and use the appropriate design figures when selecting a rainwater system.
Frequently Asked Questions
What does gutter flow rate mean?
Gutter flow rate is the volume of rainwater a guttering system can carry, measured in litres per second (L/s).
What does roof drainage area mean?
Roof drainage area is the effective roof area that a rainwater system can drain under the stated design conditions, measured in square metres (m²).
Does a gutter installed with a fall carry more water?
Generally, yes. The FloPlast chart shows higher flow rates for gutters installed at a 1:350 fall compared with level installations.
Which is better, a centre outlet or an end outlet?
A centre outlet can provide greater overall capacity, depending on the gutter profile and installation. The most suitable arrangement depends on the roof layout and calculated drainage requirements.
Shop FloPlast Guttering & Downpipes
At Brissco, we supply FloPlast guttering and downpipes in a range of profiles, including Half Round, Square Line, Deepflow Hi-Cap and Niagara Ogee.
Explore our guttering ranges to find suitable gutters, outlets, downpipes and compatible fittings for your installation.
112mm FloPlast Black Half Round Gutter 4m
Lead Time - In Stock
112mm FloPlast Half Round White Gutter 4m
Lead Time - In Stock
112mm FloPlast Half Round Brown Gutter 4m
Lead Time - In Stock
112mm FloPlast Half Round Grey Gutter 4m
Lead Time - In Stock
114mm FloPlast Black Square Gutter 4m
Lead Time - In Stock
114mm FloPlast Brown Square Gutter 4m
Lead Time - In Stock
114mm FloPlast White Square Gutter 4m
Lead Time - In Stock
Need to see it before you buy? We offer samples of our uPVC building products to help you choose the perfect fit. Simply get in touch through our contact page, and we’ll be happy to assist!