FloPlast 32mm ABS Solvent Weld Waste Anthracite Grey Pipe 3m Image

FloPlast 32mm ABS Solvent Weld Waste Anthracite Grey Pipe 3m

SKU: WS01AG

Brand: FloPlast

Comprehensive Modern System: Complete, integrated range designed for all soil and waste applications.
Maintenance-Free Finish: Consistent high-gloss colour and finish across all components with no painting required.
Tough Yet Lightweight: Durable construction combined with lightweight design for easy handling and installation.
Wide Compatibility: Compatible with most existing materials and systems for straightforward upgrades and repairs.
Standards Compliant: Manufactured to British and European Standards where applicable, ensuring reliability and quality.

Description

32mm ABS Solvent Weld Waste Pipe – Anthracite Grey | 3m Length

The 32mm ABS Solvent Weld Waste Pipe is designed to safely and efficiently convey wastewater (foul drainage) from sanitary appliances to above- or below-ground drainage systems. Manufactured in the UK from durable ABS plastic, this pipe offers a smooth bore, strong joints, and long-term reliability for domestic and light commercial installations.

The 32mm size is most commonly used for washbasins and bidets, providing an effective flow rate while maintaining a compact profile.

Key Features

32mm ABS solvent weld waste pipe
Length: 3 metres
Smooth internal bore for efficient flow
Strong, permanent solvent weld joints
Lightweight yet durable ABS construction
Manufactured in the UK
BS EN 1455 compliant and Kitemarked
Anthracite Grey finish for a clean, professional look

Typical Applications

Washbasins
Bidets
Domestic bathroom waste systems

Size guidance:

32mm – Washbasins & bidets
40mm – Baths, showers, kitchen sinks, dishwashers
50mm – Commercial use or multiple waste connections

Solvent Weld Installation Guidance

Ensure the outer wall of the pipe and inner wall of the fitting are clean and free from grit or swarf
Apply SC250 solvent cement evenly to both surfaces
Push the pipe fully into the fitting and twist slightly to ensure full contact
Wipe away excess solvent with a damp cloth
Allow 5 minutes to set
Leave the installation for 12 hours before testing

⚠️ Important: Solvent weld joints are permanent and cannot be demounted once made.

Safety Notes

Always work in a well-ventilated area
Keep solvent cement away from heat sources and naked flames
Avoid skin contact—if contact occurs, wash thoroughly with soap and water

Reliable Wastewater Management

The 32mm ABS Solvent Weld Waste Pipe delivers dependable performance, standards compliance, and a professional finish—making it a trusted choice for modern plumbing installations.

Technical Information

Delivery: 1-2 Working Days
Size: 32mm
Weight: 0.788 Kg
Brand Name: Floplast
Colour: Anthracite Grey
Guarantee: 10 Years Manufacturers
Lead Time: In Stock

Delivery & Returns

Delivery

The despatch timings we publish are estimates and due consideration needs to be made when making purchases with tight deadlines and as such we shall not be liable for any losses, costs, damages, charges, or expenses caused by any delay for delivery of the goods.

Returns Policy For Brissco Online

We appreciate that there may be occasions you may wish to return items. To help you with this process please see our returns policy below.

Returning an item – Damaged

In the event you receive damaged goods we will arrange a replacement item for you. However, it is your responsibility to notify us within 72 hours of receipt that an item has been received damaged (please see risk below).

Returning an item – Risk

On receipt of the delivery you, the customer, are responsible for those goods and any loss or damage to the goods shall be at your own risk.

Returning an item – Incorrect

If you receive incorrect goods it is your responsibility to notify us within 72 hours of receipt at which point we will make the necessary arrangements.

Delivery shortages

Firstly, our carrier delivers parcels/packages. Any shortages of them must be reported to the driver on receipt. Secondly, shortages of contents of the parcel(s)/package(s) against the enclosed Brissco advice note must be made within 72 hours.

PDFs

FAQs

1. What is a 32mm waste pipe used for?

A 32mm waste pipe is typically used to carry wastewater from washbasins and bidets to the main drainage system. It is ideal for light-duty domestic waste applications.

2. What is the difference between waste pipes and soil pipes?

Waste pipes carry grey water only (from sinks, showers, etc.), whereas soil pipes carry contaminated water from toilets. Waste pipes are smaller in diameter and do not require venting, as they do not produce harmful gases.

3. What material is this waste pipe made from?

This pipe is made from ABS (Acrylonitrile Butadiene Styrene), a strong, impact-resistant plastic commonly used in plumbing due to its durability and smooth internal bore.

4. Is this waste pipe manufactured to a recognised standard?

Yes. The pipe is manufactured in the UK to BS EN 1455 and is Kitemarked, ensuring consistent quality, safety, and performance.

5. Can this 32mm waste pipe be cut to size?

Yes. The pipe can be easily cut down to the required length using a fine-tooth saw. Always ensure the cut edge is clean and free from burrs before solvent welding.

6. How do I create a solvent weld joint correctly?

To make a proper solvent weld joint:

Ensure both the pipe and fitting surfaces are clean and dry
Apply solvent cement (such as SC250) to both surfaces
Push the pipe fully into the fitting and twist slightly
Wipe away excess solvent
Allow at least 5 minutes to set and 12 hours before testing

7. Are solvent weld joints removable once fitted?

No. Solvent weld joints are permanent. Once bonded, the joint cannot be demounted, so accurate measurement and alignment are essential before installation.

8. Is this pipe suitable for domestic and commercial use?

This 32mm pipe is mainly intended for domestic applications such as basins. Larger sizes (40mm or 50mm) are recommended for higher flow rates or commercial installations.

9. What safety precautions should be taken when using solvent cement?

Always work in a well-ventilated area, keep solvent cement away from heat or naked flames, and avoid skin contact. If contact occurs, wash thoroughly with soap and water.

10. Can this waste pipe be used with push-fit fittings?

No. This pipe is designed specifically for solvent weld systems. Push-fit systems use different pipe tolerances and sealing methods and should not be mixed with solvent weld components.

The 32mm ABS Solvent Weld Waste Pipe is a reliable, standards-compliant solution for basin waste installations, offering strong, permanent joints and long-term performance when installed correctly.